In this video, we 3D print a drone that can tilt the camera forward and back while being a fully capable FPV drone. This enables you to be able to see straight below you to get awesome birds eye view shots while still being able to do flips and high-speed maneuvers. To 3D print this drone, the largest component is 300mm x 250mm x 50mm. The battery capacity for this drone is a 6s 5200 MAh battery which provides ample flying time. This drone would be a great platform to use head tracking or camera stabilization. The wiring diagrams can be found on the SpeedyBee website for the flight stack. The only wiring that is unique for this drone is the wiring for the servo motor. The servo motor signal wire is connected to the LED pin out pad and the resource map is changed for the pad from the LED STRIP 1 to SERVO TILT. If you look up information regarding aux channels and remapping servo tilt by Joshua Bardwell, those can be a great place to start.